SDJ-C双片式钉箱机(超窄型-异型箱)

功能与特点： Function and characteristic:

◆ 法国施耐德进口四伺服驱动，精度准确，机械传动部位减少，可有效减少机械故障率。

◆ 钉箱机整个控制系统采用欧姆龙PLC控制系统。

◆ 钉箱机控制箱内接触器全部采用的士林品牌。

◆ 继电器断路器采用法国施耐德品牌，光电和接近开关采用日本欧姆龙品牌。

◆ 底模刀片采用日本钨钢制作（耐磨）。

◆ 钉箱机整组钉头全部采用特殊钢制作，电脑数控精密加工。

◆ 变换纸箱尺寸和调节纸箱钉距只需一分钟就可完成，大大节省时间操作方便。

◆ 可钉有盖箱＆无盖纸箱（有无盖箱要钉的情况下在订购机械时须说明）。

◆ 自动钉箱机后段有自动计数功能，做好的成品张数可按设定数量（1-99）分叠送至输送机械末端，方便打包捆札。

◆ 一台两用可钉单片接钉纸箱，双片接钉纸箱，不规则纸箱。

◆ 尺寸采用全电式制控制，变换尺寸只需2-3分钟。

◆ 可钉单钉/，双钉//，加强钉// / / //(两头是双钉中间部分为单钉)一次性完成，能适合不同客户对钉种的不同要求。

◆ 钉距：30-120mm任意可调。

◆ 自动钉箱机适合中小型纸箱厂，装订快速省力。

◆ 钉箱机采用触摸屏操作，参数（钉距，钉数，钉种，后挡板）变换方便快捷。

◆ 有底无盖的也可以钉。（特殊说明）。

◆ 适合瓦楞纸三层、五层、七层（七层时需要特殊说明）。

◆ 本机采用四个伺服电机（两个机头电机和两个钉距控制电机）。

◆ 整机订单调整（选配）。

◆ 堆码机（选配）

◆ 自动送丝机（选配）

◆ France Schneider imported four servo drive,precision accuracy,reducing the

mechanical transmission part,which can effectively reduce the failure rate of

the machinery.

◆  Nail box machine the whole control system adopts OMRON PLC control system.

◆ The nail box machine control box contactor used in Shilin brand.

◆ The relay circuit breaker using French brand S chneider,photoelectric and

proximity switch with Japan's OMRON brand

◆ The bottom die blade adopts Japanese tungsten steel production(wear)

◆ The nail box machine whole set of nail head all adopt the special steel

manufacturing,computer precision CNC machining.

◆ The transform carton size and adjusting nail carton from just one minute can be

completed,greatly saves time and is convenient to operate.

◆ It can nail a lid box ＆carton no cover(no cover box to nail in the case of

ordering machinery must be noted when).

◆ The automatic nail box machine after the paragraph with the function of

automatic counting,finished cartons can be set according to the number(1-99)

sub stack sent to the cnveying machinery terminal,convenient bundling.

◆ A dual-purpose can nail a monolithic ground nail carton,twin sheet nail carton,

irregular box.

◆ The dimensions using all electric control, transform size only 2-3minutes.

◆ It can nail/single,double screw//,strengthening nails// / / // (two double nail in

the middle part of single screw )once completed,can be suitable for different

customer requirements of different kinds of nail.

◆ The nail spacing:30-120mm adjustable

◆ The automatic nail box machine to send the front automatic counting paper,

fished sending strapping.

◆ The automatic nail box is suitable for small and mediumsized carton factory,

rapid and labor-saving binding.

◆ The nail box machine adopts touch screen operation,parameters(nail

margin,the number of nails,nail,tailgate)convenient and quick transformation.

◆ The bottom without a cover can also screw. (special in structions)

◆ The suitable for the three layer,five layer corrugated paper, the seven

layer(seven layer need special instructions).

◆ The machine adopts four servo motor (two head motor and two screw pitch

control motor)

◆ The machine adjustment (optional).

◆ The stacking machine (optional).

◆ The automatic feeding machine (optional)

主要配置： Main configuration:

技术参数 Technique parameter: